4m x 4m Inflatable Spider Dome

4m x 4m Inflatable Spider Dome

6m x 6m Inflatable Dome

6m x 6m Inflatable Dome

5m x 5m Inflatable Tents

£3,060.00 £2,550.00
Availability: In stock
SKU
5m-x-5m-Inflatable-Tents

Compatible file extensions to upload: jpeg, ai, eps, pdf, png

All of Poptents inflatable shelters and spider domes are renowned for their lightweight construction, allowing them to be popped up anywhere. The inflatable shelters are quickly inflated and are extremely portable due to their lightweight construction. Despite the light construction the leg tubes are extremely well protected against rips and tears with an excellent tear strength. Each foot has its own layer of wear resistant PVC mesh to further protect the spider dome from damage.
Poptents inflatable 5m x 5m spider domes are modular. This means they can be linked together to form a larger stand at exhibitions or create more covered space for teams or displays. This allows you to have a greater visual impact and presence at your events.
Poptents inflatable spider domes are printed using dye sublimation. This results in a much higher quality print and results in your artwork being printed into the fabric, not just stuck on to it. It also means there are no limitations to printing as much of the surface as you like as the full canopy goes through the printing process regardless if it is one side, one colour or the full roof in a variety of colours.


Further Information:
Poptents inflatable spider domes are constructed with four inflatable tubes inside one X shaped tube. Each leg is inflated in around 30seconds meaning your spider dome is up in 2-3 minutes. Each leg comes with an over-inflation valve which will release air when it comes to the point of over inflation preventing the inner tubes from bursting.


Instructions to set up Poptents spider dome:

Unpack and open your spider dome on the ground in an X shape.

Attach walls and awnings using the zippers on each piece.

Open the valve covers depending on if you want to inflate fast or slow.

Inflate each of the 4 legs, take care not to over inflate. Close the valves after each leg

For the last leg, help it into position by pushing it up.

Inflate the awning


more-info-image